.17 Hornet Loads

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • .17 Hornet Loads

    I was wondering if anyone has any load data for the .17 Hornet yet?
    Finally got my die set and about to start looking into loads for it, but thought I would just throw the question up here in case anyone has a starting point.

    Found a few on OS sites, but wondering if anyone here has any data to share based on locally available powder etc

  • #2
    Have you looked at ADI website yet?

    Page 81 of the 6th edition (page 84 on the actual pdf file) has data for 20gn to 30gn bullets using AR2207 and AR2219 powders.

    You can download pdf from her: http://www.adi-powders.com.au/handloaders-guide/

    Great little fox round btw.

    Comment


    • Guest's Avatar
      Guest commented
      Editing a comment
      Yes I read that and its interesting as most data I have found using ADI powders use 2205. It seems that AA1680 is the preferred powder o/s , which 2205 is the 'equivalent'.

      Looks like I will need go get some different primers as well as the consensus seems to be to use remington 7 1/2 primers, where as I was originallythinking of using CCI br4. I have a fair bit of 2205 and plenty of the BR4 primers so have to get off my butt and run some loads through quick load and see what comes out.




      Originally posted by Vromme" post=37508
      Have you looked at ADI website yet?

      Page 81 of the 6th edition (page 84 on the actual pdf file) has data for 20gn to 30gn bullets using AR2207 and AR2219 powders.

      You can download pdf from her: http://www.adi-powders.com.au/handloaders-guide/

      Great little fox round btw.

  • #3
    hi I have a 17 ackly hornet and I run 9.6 gr of 2205

    Comment

    Working...
    X