Announcement

Collapse
No announcement yet.

Short Rifle Project

Collapse
X
Collapse
  •  

  • Short Rifle Project

    Click image for larger version  Name:	Remington13_zpsad9ee739.jpg Views:	0 Size:	203.2 KB ID:	305411





    The Base Rifle

    This rifle started life as a Remington 700 Tactical with 16.5 inch barrel chambered in .308 WIN(Factory id 8553.

    From the factory these rifles ship with a Hogue synthetic overmoulded stock in a colour called "ghillie green" which is actually more of a grey colour. This stock itself is actually surprisingly good in some ways, for example it is pillar bedded. However it is fairly flimsy in the fore-end area and will flex and touch the barrel causing poor consistency off a bipod. I think if this were to be a hunting rifle i would keep it in the Hogue stock as it would suit the purpose well.

    Click image for larger version

Name:	Article10a.JPG
Views:	36
Size:	28.4 KB
ID:	305419The rifle has a heavy profile 16.5 inch barrel which has a 1/10 twist rate and is factory threaded 5/8x24 and comes with a thread protector with aggressive knurling for easy removal etc.

    The action appears to be a standard 700 but from what I could tell seems to be a bit smoother in both bolt lift and operation than other models I have used. The finish on the barrelled action is a matte black oxide finish that is even and looks good however there was some excess on the exterior metalwork and bolt body that wiped off with an oiled rag and actually helped to smooth up the bolt operation even more.

    The trigger is the X-Mark pro trigger which has good and bad points. the good being that it had no creep, the bad being that it is heavy and adjusting it as per the instructions seems to have little effect. I have spoken to other owners who have concurred that the adjustment screw does not make the trigger much lighter if at all. Also if you do loosen the screw it protrudes out of the trigger and is very annoying.




    Components And Assembly


    For this build I wanted to keep costs low but not compromise on quality and be left wanting to change things. So with that in mind I shopped around on forums and other places to get cheap parts.

    The first thing that had to go was the Hogue stock , to replace that I put a wanted add on a few forums for a HS Precision take off stock from a 5R or 700P or a bell and Carlson m40 style stock. I was contacted fairly quickly and got my hands on a 5R take off stock for under $300. This stock has a fairly vertical grip, beavertail fore-end, aluminium bedding block and is very light so suited my purposes well.

    Another component I had that I wanted to use was a Badger Ordnance Embedded Fore-end Rail(EFR) that I installed myself at home using a mill and a few hand tools, I then bedded it into the fore-end. The reason I wanted the EFR on this build was a good mounting point for my Go-Pro camera and I like to think I will get my hands on some NV gear at some stage. I also think it looks great which is important being that this is a hobby to me so I may as well do what i want.

    The stock had 2 studs at the front and one rear, I removed the 2nd stud from the front and the rear stud and replaced them with loops that I had left over from my Tikka T3 Tactical. The reason for this is I use slings with HK style snap hooks and it means I don?t have to use sling swivels to hook them on.

    Click image for larger version

Name:	Article10c.JPG
Views:	36
Size:	128.6 KB
ID:	305420At this stage I decided to paint my stock in a camo pattern using scrim net overlay and 2 different paint colours being Dulux metal shield finish Bushland from bunnings and Humbrol Acrylic spray for models Olive Drab available at most model shops (use Tamiya as a substitute).

    You may be thinking that these don?t sound like paints designed for this purpose such as durakote, cerakote or even Krylon. Well that?s true but I like the fact these colours (especially the Dulux) match our climate well and will ?break in? with use. I like to change my paint occasionally and don?t take it to seriously. As long as you tape up where you don?t want paint there isn?t really anything that can go wrong. If you don?t like it than you can just strip it back and start again or paint over it.

    I painted the Barrelled action just using the Bushland dulux paint and it turned out really well, very even and smooth looking.

    While the stock was drying I fitted a picatinny rail with 20MOA of forward cant (requirement for LR work with a 308, especially with a 16.5 inch barrel). The rail I used was purchase from Queensland Gun Exchange and is part of their ?pro Hunter? range. This is a fairly cheap line of components however in this case I was able to verify that it has 20moa of cant by comparing to my Spuhr mount(zeroing with both and finding left over MIL adjustment). The finish looks good and it mounted up solid without any gaps etc. What more can you ask for. I used blue loctite on the rail screws.

    Click image for larger version

Name:	Article10d.JPG
Views:	40
Size:	68.9 KB
ID:	305421After the paint had been left overnight I assembled the stock, action and bottom metal (Factory BDL hinged floorplate) with no issues and torqued the action screws. Something i like to do is witness mark the screws to the bottom metal so I know if there is any movement.

    For this build I had 30mm A.R.M.S throw lever rings and a vortex PST 4-16X50 MIL/MIL scope which will be replaced soon by a more appropriate (size) Bushnell 3200 Tactical 10X40 MIL/MIL.

    The total weight with the scope unloaded is 4.9KG









    Range Testing


    Click image for larger version

Name:	Article10f.JPG
Views:	36
Size:	30.5 KB
ID:	305422I took the rifle to Belmont SSAA and initially sighted in at 50M and then 100M. Using 155GR NRAA Match ammo I have 20.8 Mils free on my elevation turret from Zero.

    Accuracy wise I managed to snag a 0.6 MOA group from a PRS tripod on a bench but most were sitting around 0.8 MOA which is more than acceptable for a rifle that will be used for field shooting and not competitions very often.

    Modifications to follow

    I will be putting a small brake/ flash suppressor on the rifle. I am considering the Badger Ordnance Micro FTE as well as a few others.

    I also will change the floorplate for a DBM setup that uses AICS mags, currently i am looking at the Pacific tool and gauge stealth DBM.

    A trigger is definitely in order, I am looking at rifle basix amongst others but am hoping to see a cheapie crop up on usedguns or a forum. I would even like a Rem trigger (prior to X-mark)

    I tend to use a bipod often and I refuse to even bother with anything less than a Harris so I am going to wait and buy a Harris 6-9 swivel hopefully with notched legs.



    Conclusion

    I think short barrelled rifles in the right calibres can be a very useful multi purpose tool. Although i will admit that this rifle is not perfect for any 1 discipline or situation it does tick a lot of boxes as an all rounder that is handier than most tactical rifle builds which makes it useful in many more situations.

    You can put together a cheap enough rifle and still use good quality components if you shop around and have patience. For example, Just because you have $50 in your pocket now does not make it smart to buy a Chinese bipod when you could make do for a while, save up and buy something that won?t give up on you. Post wanted adds on forums and you will be surprised what people don?t want.

    I will admit to having expensive taste and one of the best things to come out of this as far as my development as a shooter is concerned is that i don?t need everything to be top dollar to have a good rifle. The HS precision stock off the 5R rifle for example is widely discarded and yet it fits this rifle perfectly.

    My advice for anyone new to putting together rifles and customising their setups is to just give it a go. Use common sense and if in doubt ask. But mostly HAVE FUN. And if its a shorty build wear hearing protection.

    Components used;
    • Remington 700 SPS Tactical (8553
    • HS Precision PSV096? (off Rem 700 5R)
    • Badger Ordnance EFR
    • Strikemark Go Pro mount
    • Pro Hunter 20MOA Rail
    • A.R.M.S 30mm Rings
    • Tikka T3 Tactical stock sling eyelets
    • Triad Tactical Stock pack
    • TAB Gear Sling

    Any questions you have please PM me (S12A) on the Forum

      Posting comments is disabled.

    Categories

    Collapse

    Article Tags

    Collapse

    There are no tags yet.

    Latest Articles

    Collapse

    • History Queen's Shot
      by shooting
      Target shooting is one of the oldest organized sports in Australia with records dating back to British Marines at Sydney Cove in 1788. Early competitive matches were often conducted in the grounds of local hotels with substantial prizes offered by patrons.


      Australia's First Marksmen

      Australia's first marksmen were convicts and marines who landed at Sydney Cove with the First Fleet in 1788. During the famine year of 1790, Governor Phillip selected the best marksmen...
      11-07-2019, 06:43 PM
    • Guide to 223 Rem
      by shooting
      So you brought a .223 or considering buying one!

      ( This could also be used for other calibers also )
      Below is a rough guide to this little engine that could."The little giant killer" I like to call it.




      Photo of my old (Retired) girl with her new Factory Tikka 1-8 barrel. She started life as a second handy sporter profile and then two heavy krieger barrels, a second bolt and firing pin + Spring, 4 mags and then finally the CDI DBM mag assembly...
      11-07-2019, 06:37 PM
    • Short Rifle Project
      by shooting





      The Base Rifle

      This rifle started life as a Remington 700 Tactical with 16.5 inch barrel chambered in .308 WIN(Factory id 8553.

      From the factory these rifles ship with a Hogue synthetic overmoulded stock in a colour called "ghillie green" which is actually more of a grey colour. This stock itself is actually surprisingly good in some ways, for example it is pillar bedded. However it is fairly flimsy in the fore-end area and
      ...
      11-07-2019, 06:20 PM
    • The Dummies Guide On How To Pattern A Shotgun
      by shooting
      How do I pattern my new shotgun to determine where it is shooting?


      I get asked this question at least twice a week so I thought I would share the answer here.






      Bottom Barrel: 20 metres - Modified Choke - 55%/45% pattern - Shotshell: RC 4 24g 8 1/2

      Top Barrel: 20 metres - Full Choke ( after the stock was raised 4mm ) 70%/30% pattern - Shotshell: RC 4 24g 7 1/2

      Ideally find a steel plated pattern board that is at
      ...
      11-07-2019, 06:11 PM
    • Short Rifle Project Conclusion
      by shooting
      By S12A





      Introduction.

      I recently put together a short barrelled (16.5") Remington 700, which has been the subject of an article on this website previously. This rifle was intended to be a light and handy rifle to cover most situations i would find myself participating in. The intention was never to build a dedicated long range rifle but the results have been suprising.

      Modifications

      Since the original project
      ...
      11-07-2019, 06:01 PM
    • Lady With A Gun
      by shooting
      Lady With A Gun


      Written by: Melissa Murray I suppose the best way to start is by introducing myself. I am a 35 year old woman living with an amazingly supportive partner and I have had many different careers and hobbies in my life so far. I have been a receptionist, secretary, data entry officer and much more. I have a Diploma of Beauty Therapy and have worked at one of WA’s elite day spa. My working life took a different turn when I decided to study for a Bachelor of
      ...
      11-07-2019, 05:50 PM
    Working...
    X