Announcement

Collapse
No announcement yet.

Canada 2002

Collapse
X
Collapse
  •  

  • Canada 2002

    By Pilch303

    I applied for the F-class open team that was going to go to Canada in 2002 not knowing how I would go. I was 27 at the time. I had an open rifle that was made up from an old school shilen bench rifle. I had this chambered in 308 and it booted like a cow. It was to light in weight, but did it shoot! I managed the first 10 shot possible at 300 yards in Australia using the 10 ring f open targets. This was before electronic targets, so the target was pulled between shots.


    Click image for larger version  Name:	IMG_3852.jpg Views:	0 Size:	115.3 KB ID:	305387




    I received notification sometime after applying for the Aussie team. It was decided by the NRAA that it would be a goodwill team as there wasn’t enough applicants…..because of this we couldn’t have the Australian Coat of Arms on our blazers and would receive no support.

    The captain was Nick Simms and the Managers were the Larkin boys.

    I decided that I would need a better set up than what I had….and I was running out of time. I looked at getting a Stolle action but it was going to be a long wait and also expensive….the dollar was worth about 50cents US at the time.

    I decided to get a Barnard action but wanted one that was left bolt right port, so Barnard made me one! I got a Mastin stock but wasn’t happy with the shape I specified, so ordered another from Mastin, from memory a 1414 anschutz style stock but the trigger guard set up so the trigger could be removed without having to undo the bedding screws and interfere with the zero of the rifle. Also the 16x mark 4 scope I was using was a good scope but not the best for f open(reticle was large), so I ordered a new 35x leupold competition scope with a 1/8 dot reticle……this was a lot better to use.

    I decided on going for 6.5/284 but with the shoulder bumped back about 2mm, this gave fantastic neck tension. I picked the ‘284 chambering because of the good vibes that were coming out of the US that I was reading about in Precision Shooting magazine. My gunsmith made the reamer and chambered 2x 28” maddco 8 twist barrels, one for the rifle and one as a back-up in case of the sudden death of the first barrel.

    I set about sizing shells, neck turning and getting everything ready to go and tune loads up for the barrels. I fire formed about 150x shells for each barrel and also got loads ready for each barrel.

    All tuning was initially done at 100x yards and then fine-tuned at 1000x yards. This was done on my mate’s farm at night time when there was no conditions. A load that looked good at 100 was dead set useless at 1000. It would be sub moa at 100 and about 70mm wide and about 600mm high at 1000. To make powder, primer, projectile combination work at 1000 was a matter of changing just the powder charge by .1-.2 of a grain. I had the loading gear set up next to me on a table in the middle of a paddock at midnight to do this. There was about 1kph of wind and about 1/2moa of mirage running right to left. Each barrel was done on separate nights. Once tuned the barrels would consistently achieve 1/2moa at 1000. I used redding dies, harrels thrower, rcbs priming tool and a lee hand press…..nothing to flash. I never goofed around with seating depth just seated into the lands from the get go. The difference between .1-.2 grains at 1000 yards is amazing to see….the change was instant with both barrels.

    Once in Canada I met most of the team for the first time. I had never shot with the eastern state blokes till Canada as I live 750ks from Perth and was also working fifo overseas in PNG at the time. This left me enough time on leave to tune the rifle, get gear ready and practice. Practice consisted of firing about 10 or 20x shots a day most days for about 4-5 weeks plus the local club shoot.

    Once in Canada the first thing we did regarding shooting was pick up reloading components and also fit and zero our scopes. Zeroing of the rifles was done at a private shooting range in Stittsville. It was a very impressive range. There was an onsite gun shop that was better stocked than any that I have seen here in WA.

    While setting up our rifles and shooting them I got a bollocking (proper like!) from Nick because I didn’t know how many grains of powder I was using. And I didn’t! I told him I didn’t really care so long as the gun shot. This didn’t go down well!

    The Larkin boys then proceeded to chew me out a bit more and wanted to know if I had checked my velocity, all this time with me saying it was midnight when I set the rifle up and wasn’t really bothered with that stuff at that time of night.

    They checked my velocity with the chrony from hell. It was huge this thing!

    All I could do was stand back and cop an ear full.

    The chrony was set up for a RH shooter and I am LH so Andy had to shoot the rifle for me. For five shots the velocity averaged 2961fps for a SD of 1fps. Between my highest and lowest shots there was 5fps difference from memory.

    Nothing more was said about how I set up my rifle!

    The range we were allocated at Stittsville to zero our rifles was 300 yards long. There was a vehicle track alongside the range from 0-300 yards. This track was surfaced in 9mm brass the whole way. For 1x meter in front of the firing point, brass and live ammunition was 300mm deep and the width of the firing point (about 30 metres). Lots of shooting happens in North America!

    We all fired about 900x shots each at the Connaught Range in Ottowa, Canada over a period of 3 and a bit weeks for the Teams events, individual events and Long range championships. In the time period we had 2x non shooting days were we looked around the place. The range was about 1k wide and was shared with lots of other users…….RCMP, military rifle shooters, cadets and pistol shooters. While there I had a good burst on a MG 42 and numerous goes of AR 15’s. Also shot a Garand……..they are heaps better than a grotty old 303!


    Click image for larger version  Name:	IMG_3855.jpg Views:	0 Size:	90.8 KB ID:	305388



    The first 2 ½ weeks consisted of the Canadian long range championships and Queens-prize etc. I finished 8th out of approx. 130 f open shooters for this. I won numerous bronze gongs, a gold one for the provincial team shoot (WA team: Tony Whittemore, Wayne Lancaster, Bill Hallam and myself) and also gold for the Governor Generals prize. The Governors prize was shot at 900 meters and was only for the top 10 shooters from the Grand agg. I finished equal first with Keith Cunningham and then had to go into a shoot off for the gold medal. It was a bit nerve wracking but I managed to get it together and won it!

    The F open world championships were a hoot. They were long distance…700-900 meters. I shot with people like Carlos Hathcock, Emil Preslik, JJ Conway, Skip Talbot, Larry Bartholom, Tracy Short and Keith Cunningham

    I managed to win one range outright in the individual championships….the last range of the event 20x shots @900meters and also won a silver gong coming second to Bill Hallam for the Tuesday daily aggregate.

    All shooting for both the individual championships and the Canadian Long range championships was shot in pairs. You were paired with another shooter and he fired a shot and then alternately you fired a shot……20x shot matches took some time! (similar to Bisley style shooting) You were allowed a timed 7 minutes to get your gear onto the mound and set up and then 2 minutes per shot. Because you took it in turns every shot was virtually a sighter. If you were paired with a slow poke it tested your patience. Also, the person you were paired with could be shooting full bore and was never the same person twice.

    We shot the teams event over one day and Australia did very well coming 2nd to the US. Bill Hallam coached each shooter.

    When the team shoot was broken down into individual scores Wayne Lancaster (AUS) and Larry Bartholom (US) finished equal 1st and I came second. Bill Hallam did an epic job of coaching the Aussie team.

    The main rifle rig encountered was a Stolle fitted with a Jewel trigger in a Macmillan or Shehane stock. Most barrels were Kriegers in 6.5/284. A few blokes had 260 rems but they dragged their heels a bit compared to the 6.5/284’s at 900 meters. There were 2x main scopes in use: Leupold 8.5-24x50’s and Nightforce. A lot of the better US shooters had NF because they won them as prizes. Most of the Leupolds had been doubled by Premiere.

    Things I learned:

    A well-tuned, fresh barrelled rifle takes some beating

    A top quality barrel that is worn out ain’t worth jack to you

    Tuning at the max distance you will be shooting at takes all the guess work out of the rifle and fills you with confidence like no other (out of all the shooters at the event only the WA shooters could say with authority what their rifles could group at 1000)

    Fixed scopes are easier to use than variables and have one less thing to go wrong in them and also when you go down to shoot it is one less thing you have to focus your thoughts on. Fixed scopes are also heaps lighter.

    300mags are hard to handle consistently over a long event

    Your scope must be properly centred for windage

    You must know where your zero elevation is along with your come ups.

    Set your elevation back to zero once you have finished a range

    Aim off, don’t wind off for conditions………it is to slow a decision to wind

    Sledging takes many different forms and is a real thing

    The marketing of some scopes is of a better quality than the product that they are trying to flog you

    Don’t pick a cartridge that Lapua don’t make brass for. There are other good brands of brass but availability will always haunt you

    Beware of the man with one gun. VERY few people can pull off using different rifles/calibres for different distances consistently. Bill Hallam did pull it off beautifully and managed to come 5th in the individuals. Also humping an extra rifle up and down a range that is 1k wide gets to you.

    Harris bipods can be very competitive….even in F open. Keith Cunningham used one and finished 3rd in the Individual championships.

    The brass you use needs to last the distance of the match (for us it was 900x shots) so that you are not fire forming half way through

    I also found the 1/8 dot reticle to be easier to use than the busy reticles available. I find that busy reticles distract your attention away from the centre of the target.

    If I had my time again I would pony up and buy the Stolle because you would have better primary extraction, better resale, and a better trigger set up(be able to fit a light jewel)

    It was a great education going to an event like this. It was expensive even though we stayed in barracks on the range. I took my father with me as moral support and also assist in reloading! We all had a great time and would love to go back one day with my wife to Canada.

    Thanks for reading…..this has been a few years coming.


    Click image for larger version  Name:	IMG_3849.jpg Views:	0 Size:	88.4 KB ID:	305389



    Click image for larger version  Name:	IMG_3850.jpg Views:	0 Size:	89.7 KB ID:	305391



    Click image for larger version  Name:	IMG_3854.jpg Views:	0 Size:	105.5 KB ID:	305392

    Attached Files
      Posting comments is disabled.

    Categories

    Collapse

    Article Tags

    Collapse

    There are no tags yet.

    Latest Articles

    Collapse

    • History Queen's Shot
      by shooting
      Target shooting is one of the oldest organized sports in Australia with records dating back to British Marines at Sydney Cove in 1788. Early competitive matches were often conducted in the grounds of local hotels with substantial prizes offered by patrons.


      Australia's First Marksmen

      Australia's first marksmen were convicts and marines who landed at Sydney Cove with the First Fleet in 1788. During the famine year of 1790, Governor Phillip selected the best marksmen...
      11-07-2019, 04:43 PM
    • Guide to 223 Rem
      by shooting
      So you brought a .223 or considering buying one!

      ( This could also be used for other calibers also )
      Below is a rough guide to this little engine that could."The little giant killer" I like to call it.




      Photo of my old (Retired) girl with her new Factory Tikka 1-8 barrel. She started life as a second handy sporter profile and then two heavy krieger barrels, a second bolt and firing pin + Spring, 4 mags and then finally the CDI DBM mag assembly...
      11-07-2019, 04:37 PM
    • Short Rifle Project
      by shooting





      The Base Rifle

      This rifle started life as a Remington 700 Tactical with 16.5 inch barrel chambered in .308 WIN(Factory id 8553.

      From the factory these rifles ship with a Hogue synthetic overmoulded stock in a colour called "ghillie green" which is actually more of a grey colour. This stock itself is actually surprisingly good in some ways, for example it is pillar bedded. However it is fairly flimsy in the fore-end area and
      ...
      11-07-2019, 04:20 PM
    • The Dummies Guide On How To Pattern A Shotgun
      by shooting
      How do I pattern my new shotgun to determine where it is shooting?


      I get asked this question at least twice a week so I thought I would share the answer here.






      Bottom Barrel: 20 metres - Modified Choke - 55%/45% pattern - Shotshell: RC 4 24g 8 1/2

      Top Barrel: 20 metres - Full Choke ( after the stock was raised 4mm ) 70%/30% pattern - Shotshell: RC 4 24g 7 1/2

      Ideally find a steel plated pattern board that is at
      ...
      11-07-2019, 04:11 PM
    • Short Rifle Project Conclusion
      by shooting
      By S12A





      Introduction.

      I recently put together a short barrelled (16.5") Remington 700, which has been the subject of an article on this website previously. This rifle was intended to be a light and handy rifle to cover most situations i would find myself participating in. The intention was never to build a dedicated long range rifle but the results have been suprising.

      Modifications

      Since the original project
      ...
      11-07-2019, 04:01 PM
    • Lady With A Gun
      by shooting
      Lady With A Gun


      Written by: Melissa Murray I suppose the best way to start is by introducing myself. I am a 35 year old woman living with an amazingly supportive partner and I have had many different careers and hobbies in my life so far. I have been a receptionist, secretary, data entry officer and much more. I have a Diploma of Beauty Therapy and have worked at one of WA’s elite day spa. My working life took a different turn when I decided to study for a Bachelor of
      ...
      11-07-2019, 03:50 PM
    Working...
    X